Swagelok SS-600-SET 316 Stainless Steel Ferrule Set (1 Front Ferrule / 1 Back Ferrule) for 3/8 in. Tube Fitting

Rebuild a 3/8 in. connection the right way with the exact ferrules the fitting was engineered around. The Swagelok SS-600-SET gives you one front ferrule and one back ferrule in 316 stainless steel, matched for 3/8 in. Swagelok tube fittings. You reach for this set when you replace worn ferrules, finish a field make-up, or restock your fitting kits. The two-ferrule design splits the work: the front ferrule seals against the fitting body while the back ferrule grips and supports the tube. That combination gives you a gas-tight, metal-to-metal seal with no torque passed to the tubing. Refineries, chemical plants, and instrumentation crews trust genuine Swagelok ferrules because a bargain substitute can gall, leak, or fail your hydro test. The 316 stainless chemistry fights corrosion in the wet and chemical service your plant runs. Swagelok sells these in multiples of ten, so order full sticks and keep spares on the shelf. Need 1/4 in., 1/2 in., or a nut-and-ferrule set to match? Call Collins-Oliver, your authorized distributor in Baton Rouge. Order genuine ferrules and make every connection seal on the first try.